Posts Tagged ‘show devices’

show devices

March 3rd, 2009

Pretty useful if troubleshooting hardware devices, or you just need to see what is installed in the system. The below output is from a FAS3020 with no PCI cards, and a RLM card.

CFE> show devices
Device Name          Description
——————-  ———————————————————
rlm0a                Remote LAN Module (RLM): Console at 0x3F8, RLM at 0x2F8
eeprom0a             ATMEL AT28BV256 EEPROM at 0x000C0000 offset 0x00000000
agent0a              NetApp Agent 0x99 version 15 at address 0xAE
lcd0a                i2c driver on I2C dev 0xC8000
ide0.0               PCI IDE disk unit 0 at I/O 1030
e0c                  Dual 10/100/1000 Ethernet at 0xE0D80000 (00-a0-98-08-17-80)
e0d                  Dual 10/100/1000 Ethernet at 0xE0DA0000 (00-a0-98-08-17-81)
e0a                  Dual 10/100/1000 Ethernet at 0xE0A80000 (00-a0-98-08-17-82)
e0b                  Dual 10/100/1000 Ethernet at 0xE0AA0000 (00-a0-98-08-17-83)
clock0a              ISA RTC at 0x70 (index) and 0x71 (target)
flash0a              New CFI flash at 0xFFC00000 offset 0x00200000 size 2048KB
flash0b              New CFI flash at 0xFFC00000 offset 0x00000000 size 2048KB

CFE / Loader Commands , , ,

This site is not affiliated or sponsored in anyway by NetApp or any other company mentioned within.