Archive

Posts Tagged ‘Maintenance Mode Commands’

fcdiag

March 3rd, 2009

*> fcdiag
The fcdiag command has been removed. Please use disktest command
or run Diagnostics from floppy disk, PC card or flash in order to
diagnose FC-AL related problems.

Maintenance Mode Commands , , ,

fcadmin

March 3rd, 2009

*> fcadmin
Usage: fcadmin config [-?] [-e | -d] [-t {target|initiator|unconfigured}]

[<adapter_name> … ]
       fcadmin link_stats [<channel_name>]
       fcadmin fcal_stats [<channel_name>]
       fcadmin device_map [<channel_name>]
       fcadmin reset_adapter <adapter_name>
       fcadmin reset_dev <channel_name>[.<dev_name>]
       fcadmin lip <channel_name>
       fcadmin offline <adapter_name>
       fcadmin online <adapter_name>
       fcadmin link_state [<adapter_name>]
       fcadmin channels
       fcadmin rescan [<adapter_name>]

Maintenance Mode Commands , , ,

environment

March 3rd, 2009

*> environment
Usage: environment status |
                   [status] [shelf [<adapter>]] |
                   [status] [shelf_log] |
                   [status] [shelf_stats] |
                   [status] [shelf_power_status] |
                   [status] [chassis [all | list-sensors | Voltage | Temperature | Power Supplies | Battery]]

Maintenance Mode Commands , , ,

disktest

March 3rd, 2009

*> disktest
SEQUENTIAL_ALTERNATING using [1024kb I/O – timeout: 300s queuedepth: 3 ] — Max LBA Range 6MB

disktest: will use both A and B loops for FC disks.
Disks selected: 0b.20 0b.19 0b.18 0b.17 0b.16
This test will take about 5 minutes to complete.

disktest performs reads and writes to the savecore area of
the selected disk(s). Ensure savecore has been run prior
to executing disktest to avoid losing a corefile.

Do you wish to continue?

Maintenance Mode Commands , , ,

diskcopy

March 3rd, 2009

*> diskcopy

usage:
diskcopy -s <source-disk-name> -d <destination-disk-name>
diskcopy -i -s <source-disk-name> -d <destination-disk-name> to invoke skip mode immediately
use -n <sectors> option to use a default size different than 4096 sectors
use -o to do no retries of I/O’s at the SCSI layer (USE WITH CAUTION!)

Maintenance Mode Commands , , ,

disk

March 3rd, 2009

This is useful primarily for changing ownership when you move disks around between systems (disk assign / disk reassign / disk remove_ownership)

 *> disk
usage: disk <options>
Options are:
        unfail [ -s ] <disk_name>   – unfail a disk
        power_cycle [ -f ] { [-d <disk_list>] | [ -c <channel_name> [ -s <shelf_number> ] ] } – power-cycle one or more disks
        assign {<disk_name> | all | -n <count> | auto} [-p <pool>] [-o <ownername>] [-s <sysid>] [-c block|zoned] [-f] – assign a disk to a filer or all unowned disks by specifying “all”  or <count> number of unowned disks
        show [-o <ownername> | -s <sysid> | -n | -v | -a]  – lists disks and owners
        reassign {-o <old_name> | -s <old_sysid>} [-n <new_name>] [-d <new_sysid>] – reassign disks from old filer
        remove_ownership [<disk_name> | all | -s <sysid>] [-f] – revert/remove disk ownership
        upgrade_ownership           – upgrade disks to new ownership scheme
        checksum {<disk_name> | all} [-c block | zoned]

*> disk show -v
Local System ID: 84197978

  DISK       OWNER                  POOL   SERIAL NUMBER
———— ————-          —–  ————-
0b.18                  (84197978)   Pool0  3HX2NLV9000075048S18
0b.16                  (84197978)   Pool0  3HX2NYFW00007502E16L
0b.17                  (84197978)   Pool0  3HX2NYNY00007504JERY
0b.19                  (84197978)   Pool0  3HX2NW4H000075048SEU
0b.20                  (84197978)   Pool0  3HX2P9KZ000075049G0X

*> disk_list
     DISK    CHAN  VENDOR   PRODUCT ID       REV  SERIAL#              HW (BLOCKS   BPS) DQ
———— —– ——– —————- —- ——————– — ————– —
0b.20        FC:A  NETAPP   X271_S15K3036F15 NA08 3HX2P9KZ000075049G0X ff   70197546 520  N
0b.19        FC:A  NETAPP   X271_S15K3036F15 NA08 3HX2NW4H000075048SEU ff  70197546 520  N
0b.18        FC:A  NETAPP   X271_S15K3036F15 NA08 3HX2NLV9000075048S18 ff   70197546 520  N
0b.17        FC:A  NETAPP   X271_S15K3036F15 NA08 3HX2NYNY00007504JERY ff   70197546 520  N
0b.16        FC:A  NETAPP   X271_S15K3036F15 NA08 3HX2NYFW00007502E16L ff   70197546 520  N

Maintenance Mode Commands , , ,

aggr

March 3rd, 2009

Fairly basic options with aggr. It’s useful if you have a foreign aggregate, or you need to change the boot aggregate without booting first (aggr options aggr_name root).

*> aggr
The following commands are available; for more information
type “aggr help <command>”
clear_rpbits        online              read_fsid           rewrite_fsid
destroy             options             rename             snaprestore_cancel
migrate             quota_off           restrict            status
offline             raidlabel

*> aggr clear_rpbits
usage:
aggr clear_rpbits <aggr-name> – clear reparity bits on aggregate <aggr-name>

*> aggr read_fsid aggr0
Aggregate aggr0 has an FSID of 0x4c4e6.

*> aggr rewrite_fsid aggr0
Aggregate ‘aggr0′ has had its FSID changed from 0x4c4e6 to 0x49b1e050.

*> aggr migrate
aggr migrate: No aggregate name supplied.
usage:
aggr migrate [-f] <atv-name> <recipient_name> <recipient_sysid>
  – migrates aggregate or traditional volume <atv-name>
    to the specified filer.

Maintenance Mode Commands , , ,

Maintenance Mode

March 3rd, 2009

This is a very useful area, and is the only way of doing certain tasks. When you do system upgrades or move storage between systems, this is where you reconfigure the disk ownership or change the boot aggregates.

When the system boots, it says “CTRL+C for Special Boot Options”, do this, and you will later be given 6 choices.

  Normal boot.
(2)  Boot without /etc/rc.
(3)  Change password.
(4)  Initialize owned disks (5 disks are owned by this filer).
(4a) Same as option 4, but create a flexible root volume.
(5)  Maintenance mode boot.

Option (5) gives us the Maintenance Mode command line. There are several commands available here, and I will post on each one separately to allow people to comment on each, and for me to update with ways of doing things under each command.

I may not have chance to go through all the commands, but I will pull them apart as I have time. These pages should be useful as a reference to what might be available to you.

Maintenance Mode Commands , ,



This site is not affiliated or sponsored in anyway by NetApp or any other company mentioned within.